Front Axle

Attachment and mounting kit for front axle BMW 1500 - 2000 tii This high-quality attachment kit for the front axle of the BMW New Class is specially tailored to the needs of 1500, 1600, 1800, 2000, 2000 ti, 2000 tilux up to the 2000 tii. It consists of a total of 38 parts, including bolts, nuts, sleeves and washers.The attachment kit ensures that the front axle is stable and securely attached, and does not cause unwanted noise while driving. It is only needed once per vehicle and provides optimum performance for the BMW New Class.This attachment kit is the ideal choice for anyone looking for a reliable and secure front axle attachment. It ensures a stable and secure connection between the chassis and the front axle. The 38 individual parts of the attachment kit are of the highest quality and ensure a long service life and optimal performance of the front axle.

Attachment and mounting kit for front axle BMW 2000 C, CA, CS This high-quality attachment kit for the front axle of the BMW New Class Coupe is specially tailored to the needs of 2000 C, 2000 CA and 2000 CS. It consists of a total of 38 parts, including bolts, nuts, sleeves and washers.The attachment kit ensures that the front axle is stable and securely attached, and does not cause unwanted noise while driving. It is only needed once per vehicle and provides optimum performance for the BMW New Class Coupe.This attachment kit is the ideal choice for anyone looking for a reliable and secure front axle attachment. It ensures a stable and secure connection between the chassis and the front axle. The 38 individual parts of the attachment kit are of the highest quality and ensure a long service life and optimal performance of the front axle.

Attachment and mounting kit for front axle BMW E10 / E6 1502 - 2002 turbo This high-quality attachment kit for the front axle of the BMW E10 / E6 is specially tailored to the needs of 1502, 1602, 1802, 2002, 2002 ti, 2002 tii up to the 2002 turbo. It consists of a total of 38 parts, including bolts, nuts, sleeves and washers.The attachment kit ensures that the front axle is stable and securely attached and does not cause unwanted noise while driving. It is only needed once per vehicle and provides optimum performance for the BMW E10 / E6.This attachment kit is the ideal choice for those looking for a reliable and secure attachment of the front axle. It ensures a stable and secure connection between the chassis and the front axle. The 38 individual parts of the attachment kit are of the highest quality and ensure a long life and optimal performance of the front axle.

Bump stop for front axle BMW E12 518 - 528i Bump stop for front axle left and right fitting for BMW E12 518 - 528i  is needed 2x per vehicle

Bump stop front axle BMW E24 628 CSi - 633 CSi until 05 / 1982 Bump stop for front axle left and right fitting for BMW E24 628 CSi, 630 CS and 633 CSi until 05 / 1982 is needed 2x per vehicle

Bump stop front axle for BMW E10 / E6 1502 - 2002 turbo Bump stop for front axle left and right fitting for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle NOT suitable for Bilstein dampers!!!

Bump stop front axle for BMW E12 518, 520/4, 520i, 525 and 528 until 08 / 1976 Bump stop for front axle left and right fitting for BMW E12 518, 520/4, 520i, 525 and 528 until 08 / 1976 is needed 2x per vehicle NOT suitable for Bilstein dampers!!!

Bump stop front axle for BMW E3 2500 - 3,3 Li Bump stop for front axle left and right fitting for BMW E3 2500 - 3,3 Li is needed 2x per vehicle NOT suitable for Bilstein dampers!!!

Bump stop front axle for BMW E9 2,5 CS - 3,0 CSL Bump stop for front axle left and right fitting for BMW E9 2,5 CS - 3,0 CSLis needed 2x per vehicle NOT suitable for Bilstein dampers!!!

Cap for support bearing / strut bearing BMW E10 / E6 1502 - 2002 turbo Cap for support bearing / strut bearing for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Cap nut chrome plated for strut mounts for BMW 1500 - 2000 tii Cap nut chrome platedfor strut mountsfor BMW 1500 - 2000 tiiis needed 7x per vehicle

Cap nut chrome plated for strut mounts for BMW 2000 C, CA and CS Cap nut chrome platedfor strut mountsfor BMW C, CA and CSis needed 7x per vehicle

Cap nut chrome plated for strut mounts for BMW E10 / E6 1502 - 2002 turbo Cap nut chrome platedfor strut mountsfor BMW E10 / E6 1502 - 2002 turbois needed 7x per vehicle

Inner tie rod end BMW 2000 C, CA, CS Inner tie rod endexternal thread M14 x 1,5 mmfor BMW 2000 C, CA, CS is needed 2x per vehicle

Lowering springs for BMW E6 1600 - 2002 tii The chrome-silicon steel springs are 90% cold-wound, zinc-phosphated, plastic-coated and pre-set.These lowering springs provide a balanced ride comfort in normal driving, progressive, tight suspension characteristics with increasing compression, sporty-progressive at the limit.The spring kit is suitable for BMW E6 1600 - 2002 tii.Please check with your local TÜV or Dekra inspector before buying if these springs meet the requirements for the H license plate!!!Technical data: maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmNotice:- Front axle spring has NO preload on original dampers. Shortened dampers are required.Scope of delivery K.A.W.® SpringKit:2 x front axle spring and 2 x rear axle springApproval: with parts certificate

Lowering springs for BMW E10 1502 - 2002 turbo The chrome-silicon steel springs are 90% cold-wound, zinc-phosphated, plastic-coated and pre-set.These lowering springs provide a balanced ride comfort in normal driving, progressive, tight suspension characteristics with increasing compression, sporty-progressive at the limit.The spring kit is suitable for BMW E10 1502 - 2002 turbo.Please check with your local TÜV or Dekra inspector before buying if these springs meet the requirements for the H license plate!!!Technical data: maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmNotice:- Front axle spring has NO preload on original dampers. Shortened dampers are required.Scope of delivery K.A.W.® SpringKit:2 x front axle spring and 2 x rear axle springApproval: with parts certificate

Mounting kit for stabilizer front axle with diameter 15 mm BMW E10 / E6 1502 - 2002 turbo Mounting kit for stabilizer with diameter 15 mm for front axle for BMW E10 / E6 1502 - 2002 turbo is needed 1x per vehicle

Protection tube / dust cap shock absorber front BMW E10 / E6 1502 - 2002 turbo Protection tube / dust cap for shock absorber front axle for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle NOT suitable for Bilstein shock absorbers

Protection tube shock absorber front axle BMW E12 518 - 528i from 08 / 1976 Protection tube for shock absorber front axle for BMW E12 518 - 528i from 08 / 1976 is needed 2x per vehicle

Protection tube shock absorber front axle BMW E24 628 CSi - M635 CSi until 05 / 1982 Protection tube for shock absorber front axlefor BMW E24 628 CSi - M635 CSi until 05 / 1982 is needed 2x per vehicle

Rod rubber 15 mm for front axle BMW E10 / E6 1502 - 2002 turbo Bar rubber for front axle diameter 15 mm for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber bearing for stabilizer diameter 16 mm BMW E10 / E6 1502 - 2002 turbo Rubber bearing for stabilizer with diameter 16 mm for front axlefor BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber bearing for stabilizer diameter 16 mm BMW E12 518 - 528i Rubber bearing for stabilizer with diameter 16 mm for front axlefor BMW E12 518 - 528iis needed 2x per vehicle

Rubber bearing for stabilizer diameter 16 mm BMW E21 315 - 320/6 Rubber bearing for stabilizer with diameter 16 mm for front axlefor BMW E21 315 - 320/6 is needed 2x per vehicle