BMW 1502 - 2002 turbo ( E10 )

Attachment and mounting kit for front axle BMW E10 / E6 1502 - 2002 turbo This high-quality attachment kit for the front axle of the BMW E10 / E6 is specially tailored to the needs of 1502, 1602, 1802, 2002, 2002 ti, 2002 tii up to the 2002 turbo. It consists of a total of 38 parts, including bolts, nuts, sleeves and washers.The attachment kit ensures that the front axle is stable and securely attached and does not cause unwanted noise while driving. It is only needed once per vehicle and provides optimum performance for the BMW E10 / E6.This attachment kit is the ideal choice for those looking for a reliable and secure attachment of the front axle. It ensures a stable and secure connection between the chassis and the front axle. The 38 individual parts of the attachment kit are of the highest quality and ensure a long life and optimal performance of the front axle.

Bump stop front axle for BMW E10 / E6 1502 - 2002 turbo Bump stop for front axle left and right fitting for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle NOT suitable for Bilstein dampers!!!

Cap for support bearing / strut bearing BMW E10 / E6 1502 - 2002 turbo Cap for support bearing / strut bearing for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Cap nut chrome plated for strut mounts for BMW E10 / E6 1502 - 2002 turbo Cap nut chrome platedfor strut mountsfor BMW E10 / E6 1502 - 2002 turbois needed 7x per vehicle

Lowering springs for BMW E6 1600 - 2002 tii The chrome-silicon steel springs are 90% cold-wound, zinc-phosphated, plastic-coated and pre-set.These lowering springs provide a balanced ride comfort in normal driving, progressive, tight suspension characteristics with increasing compression, sporty-progressive at the limit.The spring kit is suitable for BMW E6 1600 - 2002 tii.Please check with your local TÜV or Dekra inspector before buying if these springs meet the requirements for the H license plate!!!Technical data: maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmNotice:- Front axle spring has NO preload on original dampers. Shortened dampers are required.Scope of delivery K.A.W.® SpringKit:2 x front axle spring and 2 x rear axle springApproval: with parts certificate

Lowering springs for BMW E10 1502 - 2002 turbo The chrome-silicon steel springs are 90% cold-wound, zinc-phosphated, plastic-coated and pre-set.These lowering springs provide a balanced ride comfort in normal driving, progressive, tight suspension characteristics with increasing compression, sporty-progressive at the limit.The spring kit is suitable for BMW E10 1502 - 2002 turbo.Please check with your local TÜV or Dekra inspector before buying if these springs meet the requirements for the H license plate!!!Technical data: maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmNotice:- Front axle spring has NO preload on original dampers. Shortened dampers are required.Scope of delivery K.A.W.® SpringKit:2 x front axle spring and 2 x rear axle springApproval: with parts certificate

Mounting kit for stabilizer front axle with diameter 15 mm BMW E10 / E6 1502 - 2002 turbo Mounting kit for stabilizer with diameter 15 mm for front axle for BMW E10 / E6 1502 - 2002 turbo is needed 1x per vehicle

Protection tube / dust cap shock absorber front BMW E10 / E6 1502 - 2002 turbo Protection tube / dust cap for shock absorber front axle for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle NOT suitable for Bilstein shock absorbers

Rod rubber 15 mm for front axle BMW E10 / E6 1502 - 2002 turbo Bar rubber for front axle diameter 15 mm for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber bearing for stabilizer diameter 16 mm BMW E10 / E6 1502 - 2002 turbo Rubber bearing for stabilizer with diameter 16 mm for front axlefor BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber bearing in front axle carrier BMW E10 / E6 1502 - 2002 tii Rubber bearing in front axle carrier for BMW E10 / E6 1502 - 2002 tii is needed 2x per vehicle

Rubber bearing wishbone inner BMW E10 / E6 1502 - 2002 turbo Rubber bearing wishbone inner for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber bearing wishbone outer BMW E10 / E6 1502 - 2002 turbo Rubber bearing in wishbone outer for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Rubber block for stabilizer front axle BMW E10 / E6 1502 - 2002 turbo Rubber block for stabilizer front axle for BMW E10 / E6 1502 - 2002 turbo is needed 8x per vehicle

Screw for tie rod lever BMW E10 / E6 1502 - 2002 turbo Screw for tie rod lever for BMW E10 / E6 1502 - 2002 turbo is needed 6x per vehicle

Sport suspension 60 mm / 35 mm for BMW E10 1502 - 2002 turbo This sports suspension is composed of lowering springs and special sports shock absorbers.The sports shock absorbers are characterized by their sporty and comfortable tuning.The sports suspensions are specially developed for road use.The result: complete suspensions perfectly tuned to the respective vehicle.This suspension is suitable for the BMW E10 1502 - 2002 turbo.Please check with your TÜV or Dekra inspector before you buy, if this suspension meets the requirements for the H license plate!!!Technical data:maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmScope of delivery: K.A.W.® PlusKit:4 x lowering springs and 4 x sport shock absorbersApproval:with parts certificate

Sport suspension 60 mm / 35 mm for BMW E6 1600 - 2002 tii This sports suspension is composed of lowering springs and special sports shock absorbers.The sports shock absorbers are characterized by their sporty and comfortable tuning.The sports suspensions are specially developed for road use.The result: complete suspensions perfectly tuned to the respective vehicle.This suspension is suitable for the BMW E6 1600 - 2002 tii.Please check with your TÜV or Dekra inspector before you buy, if this suspension meets the requirements for the H license plate!!!Technical data:maximum tested axle loads (VA): 800 kgmaximum tested axle loads (HA): 840 kglowering (VA): 60 mmlowering (HA): 35 mmScope of delivery: K.A.W.® PlusKit:4 x lowering springs and 4 x sport shock absorbersApproval:with parts certificate

Spring pad front for BMW E10 / E6 1502 - 2002 turbo Spring pad front for BMW E10 / E6 1502 - 2002 turbo is needed 4x per vehicle

Strut bearings front axle BMW E10 / E6 1502 - 2002 turbo Strut bearings for front axle fits left and right with integrated ball bearingfor BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Support joint for front axle BMW E10 / E6 1502 - 2002 turbo Support joint for front axle for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Tie rod center for BMW E10 / E6 1502 - 2002 turbo Tie rod center for BMW E10 / E6 1502 - 2002 turbo is needed 1x per vehicle

tie rod end inner BMW E10 / E6 1502 - 2002 turbo Inner tie rod endexternal thread M14 x 1,5 mmfor BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

tie rod end outer BMW E10 / E6 1502 - 2002 turbo tie rod end outside for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle

Track rod outer incl. joints for BMW E10 / E6 1502 - 2002 turbo Outside tie rod including joints for BMW E10 / E6 1502 - 2002 turbo is needed 2x per vehicle